Izvestiya of Saratov University.

Mathematics. Mechanics. Informatics

ISSN 1816-9791 (Print)
ISSN 2541-9005 (Online)

For citation:

Belostochny G. N., Myltcina O. A. Dynamic Stability of Heated Geometrically Irregular Shallow Shell of Constant Torsion in Supersonic Gas Flow. Izvestiya of Saratov University. Mathematics. Mechanics. Informatics, 2019, vol. 19, iss. 4, pp. 397-408. DOI: 10.18500/1816-9791-2019-19-4-397-408, EDN: DDFZPB

This is an open access article distributed under the terms of Creative Commons Attribution 4.0 International License (CC-BY 4.0).
Published online: 
Full text:
(downloads: 157)
Article type: 

Dynamic Stability of Heated Geometrically Irregular Shallow Shell of Constant Torsion in Supersonic Gas Flow

Belostochny Grigory Nikolaevich, Saratov State University
Myltcina Olga Anatolevna, Saratov State University

Heated until invariable temperature, geometrically irregular shallow shell of constant torsion blown by supersonic gas flow from one side of the main surfaces was considered. As the basis, a continual model of thermoelastic system “shell-ribs” was taken. Singular differential equations of dynamical thermostability of geometrically irregular shallow shell had summands containing “stretch-compression” and “shift’’ of the ribs. Tangential forces caused by heating of the shell and transversal strain were recorded by “piston theory” in a standard way. Tangential forces were preliminarily defined on the basis of the solutions of singular differential equations of momentless thermoelasticity in displacements with inhomogeneous edge conditions and were contained in a Brian form. The solution of the system of dynamical equations of thermoelasticity of the shell was searched for in the form of the sum of the double trigonometric series with time coordinate variable coefficients for bending function and polynomials for the tangential components of the field of displacement. On the basis of Galerkin procedure the system of differential equations for the coefficients of approximated series was defined. Then it was reduced to one differential equation of the forth order. The solution was obtained in the second approximation, which corresponded to two half-waves along the flow and one half-wave in perpendicular direction. Critical values of relative flow rates were defined using standard techniques of the analysis of dynamical stability of geometrically irregular shallow shell. Quantitative results were presented in the tables showing the dependence of geometrical parameters of the elastic system and temperature on the values of critical rates.

  1. Rassudov V. M. Deformations of gently sloping shells supported by stiffeners. Uchenye zapiski SGU. Vyp. mekhanicheskiy, 1956, vol. 52, pp. 51–91 (in Russian).
  2. Rostovtsev G. G. Calculation of thin flat skin reinforced with stiffeners. Trudy LIIG VF, 1940, iss. 20, pp. 14–18 (in Russian).
  3. Novozhilov V. V. Raschet napryazheniy v konstruktsiyakh korpusa podvodnykh lodok s uchetom vliyaniya poperechnykh pereborok [Calculation of stresses in submarine hull structures taking into account the influence of transverse bulkheads]. Moscow, Oborongiz, 1945. 60 p. (in Russian).
  4. Prokopov V. K. Skeletal method for calculating a finned cylindrical shell. In: Nauchnotekhn. inform. byul. Leningr. politekhn. in-ta, 1957, no. 12, pp. 18–29 (in Russian).
  5. Abovskii N. P. On variational equations for flexible ribbed and other structurally anisotropic flat shells. In: Teoriia plastin i obolochek [Theory of Plates and Shells]. Moscow, Nauka, 1974, pp. 4–7 (in Russian).
  6. Zhilin P. A. General theory of ribbed shells. In: Trudy TsKTI. Vyp. 88: Prochnost’ gidroturbin [Proc. of the Central Turbine Boiler Institute. Iss. 88: Strength of hydraulic turbines]. Leningrad, Izd-vo TsKTI, 1968, pp. 46–70 (in Russian).
  7. Belostochnyi G. N., Ul’yanova O. I. Continuum model for a composition of shells of revolution with thermosensitive thickness. Mechanics of Solids, 2011, vol. 46, iss. 2, pp. 184–191. DOI: https://doi.org/10.3103/S0025654411020051
  8. Zhilin P. A. Linear theory of ribbed shells. Izv. Akad. Nauk SSSR, Mekhanika Tverdogo Tela [The Proceedings of the USSR Academy of Sciences, Mechanics of Solids], 1970, no. 4, pp. 150–166 (in Russian).
  9. Belostochnyi G. N., Rassudov V. M. Continuum model of orthotropic heat-sensitive “shellribs” system taking into account the influence of large deflection. Mekhanika deformiruemykh sred [Мechanics of Deformable Media. Collected of Article]. Saratov, Izd-vo Saratov. polytekhn. in-ta, 1983. Iss. 8, pp. 10–22 (in Russian).
  10. Belostochnyi G. N. Analytical methods for determination of closed integrals of singular differential equations of thermoelasticity of geometrically irregular shells. Doklady Akademii voennykh nauk [Reports of the Academy of Military Sciences], 1999, no. 1, pp. 14–26 (in Russian).
  11. Kаrpov V. V., Sal’nikov A. Yu. Variation method of getting nonlinear equations of flat ribbed shells‘ movement. Vestnik Grazhdanskikh Inzhenerov [Bulletin of Civil Engineers], 2008, no. 4 (17), pp. 121–124 (in Russian).
  12. Mikhailov B. K. Plastiny i obolochki s razryvnymi parametrami [Plates and shells with discontinuous parameters]. Leningrad, Leningrad Univ. Press, 1980. 196 p. (in Russian).
  13. Gekkeler I. V. Statika uprugogo tela [Statics of an elastic body]. Leningrad, Moscow, ONTI, 1934. 287 p. (in Russian).
  14. Vol‘mir A. S. Obolochki v potoke zhidkosti i gaza [The shells in flow liquid and gas]. Moscow, Nauka, 1979. 320 p. (in Russian). 
  15. Ambartsumyan S. A., Bagdasaryan Zh. E. Of the stability of orthotropic plates streamlined by a supersonic gas flow. Izv. Akad. Nauk SSSR, OTN, Mekhanika i Mashinostroenie [The Proceedings of the USSR Academy of Sciences, Department of Engineering, Mechanics and Engineering], 1961, no. 4, pp. 91–96 (in Russian).
  16. Bolotin V. V., Novichkov Yu. N. Buckling and steady-state flayer thermally compressed panels in supersonic flow. Inzhenernyi Zhurnal [Engineering Journal], 1961, no. 2, pp. 82– 96 (in Russian).
  17. Movchan A. A. Oscillations of the plate moving in the gas. Prikladnaia Matematika i Mekhanika [Applied Mathematics and Mechanics], 1956, vol. 20, no. 2, pp. 211–222 (in Russian).
  18. Tung Ming-teh. The stability of an elastic plate in a supersonic flow. Dokl. Akad. Nauk SSSR [The Proceedings of the USSR Academy of Sciences], 1958, vol. 120, no. 4, pp. 726– 729 (in Russian).
  19. Bolotin V. V. Thermal buckling of plates and shallow shells in a supersonic gas flow. Raschety na prochnost’ [Strength Calculations]. Moscow, Mashgiz, 1960. Iss. 6, pp. 190– 216 (in Russian).
  20. Myltcina O. A., Belostochnyi G. N. Stability of heated orthotropic geometrically irregular plate in a supersonic gas flow. PNRPU Mechanics Bulletin, 2017, no. 4, pp. 109–120 (in Russian). DOI: https://doi.org/10.15593/perm.mech/2017.4.08
  21. Belostochnyi G. N., Myltcina O. A. Dynamic stability of heated geometrically irregular cylindrical shell in supersonic gas flow. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2018, vol. 22, no. 4, pp. 750– 761 (in Russian). DOI: https://doi.org/10.14498/vsgtu1653
  22. Ogibalov P. M. Voprosy dinamiki i ustoichivosti obolochek [Questions of dynamics and stability of shells]. Moscow, Moscow Univ. Press, 1963. 419 p. (in Russian).
  23. Egorov K. V. Osnovy teorii avtomaticheskogo redulirovaniia [Fundamentals of the theory of automatic control]. Moscow, Energiia, 1967. 648 p. (in Russian).
  24. Rassudov V. M., Krasiukov V. P., Pankratov N. D. Nekotorye zadachi termouprugosti plastinok i pologikh obolochek [Some problems of thermoelasticity of plates and flat covers]. Saratov, Izd-vo Sarat. un-ta , 1973. 155 p. (in Russian).
  25. Nazarov A. A. Osnovy teorii i metody rascheta pologikh obolocher [Fundamentals of the theory and methods for designing shallow shells]. Leningrad, Moscow, Stroyizdat, 1966. 304 p. (in Russian).
  26. Vol‘mir A. S. Ustoichivost’ deformiruemykh sistem [Stability of deformable systems]. Moscow, Nauka, 1967. 984 p. (in Russian).