Izvestiya of Saratov University.

Mathematics. Mechanics. Informatics

ISSN 1816-9791 (Print)
ISSN 2541-9005 (Online)

For citation:

Eremin A. V., Zinina S. A., Bragin D. M., Popov A. I. On a method for investigating heat transfer processes in porous media with ordered macrostructures. Izvestiya of Saratov University. Mathematics. Mechanics. Informatics, 2026, vol. 26, iss. 2, pp. 211-224. DOI: 10.18500/1816-9791-2026-26-2-211-224, EDN: NEJOCV

This is an open access article distributed under the terms of Creative Commons Attribution 4.0 International License (CC-BY 4.0).
Published online: 
01.06.2026
Full text:
download
(downloads: 13)
Language: 
Russian
Heading: 
Mechanics
Article type: 
Article
UDC: 
536.21
DOI: 
10.18500/1816-9791-2026-26-2-211-224
EDN: 
NEJOCV

On a method for investigating heat transfer processes in porous media with ordered macrostructures

Autors: 
Eremin Anton V., Samara State Technical University
Zinina Sofya Alekseevna, Samara State Technical University
Bragin Dmitry M., Samara State Technical University
Popov Andrey I., Samara State Technical University
Abstract: 

This paper proposes a mathematical modeling method for the heat conduction process in a porous medium with an ordered macrostructure. Based on the combined use of the minimal representative volume method and computational homogenization, a dependence of the effective thermal conductivity of the porous medium on the geometric characteristics (thickness, height) of the elementary cell — the unit structural element of the studied medium — is obtained. The elementary cell is considered as a triply periodic minimal surface (TPMS) of the Schwarz P type. The derived dependence for determining the values of the effective thermal conductivity coefficient was used in formulating the boundary value problem of heat conduction in a thin porous plate under first-kind boundary conditions. Using an approximate analytical method based on the introduction of additional boundary characteristics and a new unknown function, a simple analytical solution to the formulated problem was obtained. The analysis of the obtained solutions led to the conclusion that TPMS cells can be used for designing materials with specified thermophysical properties. In particular, it is shown that by adjusting the porosity of the plate, the intensity of heat transfer can be increased or decreased, and the required values of the plate’s thermal resistance can be achieved.

Key words: 
effective thermal conductivity
minimal surface
TPMS
Schwarz minimal surface (Schwarz P)
approximate analytical method
additional unknown function
additional boundary characteristics
heat flux
porosity
Acknowledgments: 
This work was supported by the Russian Science Foundation (project No. 23-79-10044, https://rscf.ru/project/23-79-10044/).
References: 
  1. Zhao X., Liu Y., Zhao L., et al. A scalable high-porosity wood for sound absorption and thermal insulation. Nature Sustainability, 2023, vol. 6, iss. 3, pp. 306–315. DOI: https://doi.org/10.1038/s41893-022-01035-y
  2. Wang S., Xiao Y., Gu J., Hu Ch., Zhang H., Wen J. Double-panel metastructure lined with porous material for broadband low-frequency sound insulation. Applied Acoustics, 2023, vol. 207, art. 109332. DOI: https://doi.org/10.1016/j.apacoust.2023.109332
  3. Alifanov O. M., Salosina M. O., Budnik S. A., Nenarokomov A. V. Design of aerospace vehicles’ thermal protection based on heat-insulating materials with optimal structure. Aerospace, 2023, vol. 10, iss. 7, art. 629. DOI: https://doi.org/10.3390/aerospace10070629
  4. Li X., Shao J., Zheng J., Bai C., Zhang X., Qiao Y., Colombo P. Fabrication and application of porous materials made from coal gangue: A review. International Journal of Applied Ceramic Technology, 2023, vol. 20, iss. 4, pp. 2099—2124. DOI: https://doi.org/10.1111/ijac.14359
  5. Fteiti M., Ghalambaz M., Sheremet M., Ghalambaz M. The impact of random porosity distribution on the composite metal foam-phase change heat transfer for thermal energy storage. Journal of Energy Storage, 2023, vol. 60, art. 106586. DOI: https://doi.org/10.1016/j.est.2022.106586
  6. Wang F., Jiang H., Chen Y., Li X. Predicting thermal and mechanical performance of stochastic and architected foams. International Journal of Heat and Mass Transfer, 2021, vol. 171, art. 121139. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121139
  7. Zhang J., Shen Y., Sun Y., Yang J., Gong Y., Wang K., Zhang Z., Chen X., Bai L. Design and mechanical testing of porous lattice structure with independent adjustment of pore size and porosity for bone implant. Journal of Materials Research and Technology, 2022, vol. 18, pp. 3240–3255. DOI: https://doi.org/10.1016/j.jmrt.2022.04.002
  8. Dharmalingam L. K., Aute V., Ling J. Review of triply periodic minimal surface (TPMS) based heat exchanger designs. International Refrigeration and Air Conditioning Conference, 2022, art. 2393. Available at: https://docs.lib.purdue.edu/iracc/2393/ (accessed March 20, 2025).
  9. Iyer J., Moore T., Nguyen D., Roy P., Stolaroff J. Heat transfer and pressure drop characteristics of heat exchangers based on triply periodic minimal and periodic nodal surfaces. Applied Thermal Engineering, 2022, vol. 209, art. 118192. DOI: https://doi.org/10.1016/j.applthermaleng.2022.118192
  10. Dixit T., Al-Hajri E., Paul M. C., Nithiarasu P., Kumar S. High performance, microarchitected, compact heat exchanger enabled by 3D printing. Applied Thermal Engineering, 2022, vol. 210, art. 118339. DOI: https://doi.org/10.1016/j.applthermaleng.2022.118339
  11. Li W., Li W., Yu Z. Heat transfer enhancement of water-cooled triply periodic minimal surface heat exchangers. Applied Thermal Engineering, 2022, vol. 217, art. 119198. DOI: https://doi.org/10.1016/j.applthermaleng.2022.119198
  12. Stallard S., Jiang H., Chen Y., Bergman T. L., Li X. Exploring the design space of the effective thermal conductivity, permeability, and stiffness of high-porosity foams. Materials & Design, 2023, vol. 231, art. 112027. DOI: https://doi.org/10.1016/j.matdes.2023.112027
  13. Abueidda D. W., Al-Rub R. K. A., Dalaq A. S., Lee D. W., Khan K. A., Jasiuk I. T. Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces. Mechanics of Materials, 2016, vol. 95, pp. 102–115. DOI: https://doi.org/10.1016/j.mechmat.2016.01.004
  14. Popov A., Eremin A., Bragin D. Modeling and measurement of effective thermal conductivity of materials reinforced with bars. International Journal of Thermophysics, 2023, vol. 44, iss. 2, art. 17. DOI: https://doi.org/10.1007/s10765-022-03137-3
  15. Eremin A., Kishov E., Popov A. Discrete heat transfer model with space-time nonlocality. International Communications in Heat and Mass Transfer, 2022, vol. 138, art. 106346. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2022.106346
  16. Popov A. I., Bragin D. M., Eremin A. V. Effective thermal conductivity of structured porous medium: Numerical study. Defect and Diffusion Forum, 2022, vol. 419, pp. 69–76. DOI: https://doi.org/10.4028/p-oepvt9
  17. Zeng C., Wang W., Hai K., Ma S. Lightweight airborne TPMS-filled reflective mirror design for low thermal deformation. Composite Structures, 2024, vol. 327, art. 117665. DOI: https://doi.org/10.1016/j.compstruct.2023.117665
  18. Zinina S., Eremin A. V., Popov A. I., Bragin D. M. Mathematical modeling of thermal conductivity in a porous medium with an ordered macrostructure. Journal of Mathematical Sciences, 2025, pp. 1–10. DOI: https://doi.org/10.1007/s10958-025-07730-3, EDN: SGNESN
  19. Hsieh M. T., Valdevit L. Minisurf — A minimal surface generator for finite element modeling and additive manufacturing. Software Impacts, 2020, vol. 6, art. 100026. DOI: https://doi.org/10.1016/j.simpa.2020.100026
  20. Pan C., Tang L. H., Yue X. Minimum cross-section dominated effective thermal conductivity in morphology-modulated gyroid lattices. International Journal of Thermal Sciences, 2026, vol. 221, art. 110468. DOI: https://doi.org/10.1016/j.ijthermalsci.2025.110468
  21. Austin J. Symposium on Thermal Insulating Materials: Columbus Regional Meeting. American Society For Testing Materials, 1939, pp. 65–67.
  22. Hashin Z., Shtrikman S. A variational approach to the theory of the effective magnetic permeability of multiphase materials. Journal of Applied Physics, 1962, vol. 33, iss. 10, pp. 3125–3131. DOI: https://doi.org/10.1063/1.1728579
  23. Cruz-Matías I., Ayala D., Hiller D., Gutsch S., Zacharias M., Estrad´e S., Peir´o F. Sphericity and roundness computation for particles using the extreme vertices model. Journal of Computational Science, 2019, vol. 30, pp. 28–40. DOI: https://doi.org/10.1016/j.jocs.2018.11.005
  24. Fok P. J. Y., Kandasamy R., Ho J. Y., Wong T. N. Enhancing the performance of composite phase change materials using novel triply periodic minimal surface structures. Chemical Engineering Journal, 2023, vol. 476, art. 146352. DOI: https://doi.org/10.1016/j.cej.2023.146352
  25. Bragin D. M., Popov A. I., Eremin A. V. The thermal conductivity properties of porous materials based on TPMS. International Journal of Heat and Mass Transfer, 2024, vol. 231, art. 125863. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.125863
  26. Mirabolghasemi A., Akbarzadeh A., Rodrigue D., Therriault D. Thermal conductivity of architected cellular metamaterials. Acta Materialia, 2019, vol. 174, pp. 61–80. DOI: https://doi.org/10.1016/j.actamat.2019.04.061
  27. Molteni M., Candidori S., Graziosi S., Gariboldi E. Improving the thermal response flexibility of 2- and 3-phase composite phase change materials by metallic triply periodic minimal surface structures. Journal of Energy Storage, 2023, vol. 72, pt. C, art. 108185. DOI: https://doi.org/10.1016/j.est.2023.108185
  28. Eremin A. Study of thermal exchange with liquid flowing in a cylindrical channel. 2019 International Science and Technology Conference “EastConf IEEE”. Vladivostok, Russia, 2019, pp. 1–5. DOI: https://doi.org/10.1109/EastConf.2019.8725422
  29. Stefanyuk E. V., Kudinov V. A. Additional boundary conditions in nonstationary problems of heat conduction. High Temperature, 2009, vol. 47, pp. 250–262. DOI: https://doi.org/10.1134/S0018151X09020163
Received: 
21.03.2025
Accepted: 
07.02.2026
Published: 
01.06.2026
  • 62 reads